反力矩支架的安装：反力矩支架应安装在减速机朝向的工作机的那一侧，reducer，以减小附加在工作机轴上的弯矩。 反力矩支架与固定支承联接端的轴套使用橡胶等弹性体，reducer生产商，以防止发生挠曲并吸收所产生的转矩波动.

Reverse torque support installation: the reverse torque bracket should be installed on the side of the working machine facing the reducer in order to reduce the additional bending moment on the working shaft. The rubber and other elastomers are used in the shaft sleeve of the reverse torque bracket and the fixed support junction to prevent the flexure and absorption of the torque ripple.

减速机一般用于低转速大扭矩的传动设备，把电动机、内燃机或其它高速运转的动力通过减速机的输入轴上的齿数少的齿轮啮合输出轴上的大齿轮来达到减速的目的，普通的减速机也会有几对相同原理齿轮达到理想的减速，大小齿轮的齿数之比，reducer谁家好，就是传动比。

Reducer is generally used in driving equipment of low speed high torque， large gear gear output shaft power motor， internal combustion engine or other high speed running through the reducer input shaft less number of teeth on the reducer to achieve the pure of general reducer will have several pairs of the same principle to achieve the ideal effect of gear reducer. The size of the number of teeth of the gear ratio， the transmission ratio is.

减速机内部齿轮的齿距和压力角 小齿距能***有较多的轮齿同时接触，齿轮重叠增多，减少单个齿轮挠曲，降低传动噪声，提高传动精度。较小的压力角由于齿轮接触角和横六角空心砖模具向重叠比都比较大，因此运转噪声小、精度高。

The tooth distance of the gear in the reducer and the small pitch of the pressure angle can ensure that there are more teeth at the same time，reducer购买， the overlap of the gear is increased， the deflection of the single gear is reduced， the transmission noise is reduced， and the transmission precision is improved. The smaller pressure angle is due to the larger contact ratio between the gear contact angle and the six corners of the hollow brick mold， so the running noise is small and the accuracy is high.